LR1 HAGE Led design

Suitable small and large indoor spaces perfectly fit in modern, minimalist interior design.
This model is made of one light rail composed with a customized number of light spots. This model can include, and conceal, a power supply only up to 35W, equivalent for 3 LED modules, or ±3000 lm. Larger power supplies have to be installed in a separate location or in a separate enclosure next to it. Separate from its power supply, the appliance can be smaller, and very small in regard to its light output. The transparent satine surface of the cover diffuses the light beams while keeping the light output optimal. The white cover completely hides the hardware behind it, diffuses the light better. The light output is less optimized than with a transparent cover but is still excellent.
There is no limitation in the length and in the number of light spots of this model.

Indoor use only.

The pictures below show several short lenght variants with one or two LED modules.
Longer variants, with more LED modules are, of course, possible.

The first picture shows a basic model with white matt cover.

The picture below shows the minimal visual impact of this short sized model with white matt cover.

The same model with the light turned on

This is the same module as on the previous page, fitted a with transparent satine half-round cover.
It has block terminals for large cables on both sides.
It's typically adjusted between 15W (1800 lm) and 20W (2400 lm).

The same model with the light turned on

The same model fitted with a white matt cover with and the light turned on

Similar model with one light spot, transparent satine cover
and a large block terminal fitted on a 45° bracket support.

The same model with a white matt cover with and the light turned on.