LR1 HAGE Led design

Decorative, Ambiant, Dot or Indicator Light. At customer request, we can put them on customized galvanized steel or aluminium support. They can also be inserted in a 15 * 15 mm PVC profile. The PCB size is only 23mm * 9mm and include a heatsink pad, large soldering pads for easy wiring, a hole compatible with M4 and M3 screws, making it very easy to mount anywhere.

There are two versions: 150 mA (0.5 W, 60 lm) and 20 mA (0.06 W, 7 lm).
The 150 mA version has to be connected in series with other 150 mA LEDs: 4W in each series of 8 (24Vsc). 3W in series of 6 (18Vdc), 2W in series of 4 (12Vdc), 1W in series of 2 (6Vdc), 0.5W in stand alone (3Vdc).

The 20 mA exists in two sub-versions: Stand alone indicator and Series Connected.
The current of the Stand Alone version is reduced to 2.4 mA (0,007 W) when used on 24 VAC with a 10K resistor. Other resistor optimized for other voltages and other currents can be used at customer request for auqntities higher than 500 pieces. The Stand Alone version can be connected in parallele with any number of other LED devices sharing the same power supply. The light output is reduced to limit current comsumption. The current can be reduced to as low as 1mA.

The Series Connected version will emits more light and work at 20 mA which is the optimal current for this type of LED.
It has to be connected in series with other 20 mA LEDs: 0.48W in each series of 8 (24Vsc). 0.36W in series of 6 (18Vdc), 0.24W in series of 4 (12Vdc), 0.12W in series of 2 (6Vdc), 0.06W in stand alone (3Vdc).

Abvailable light colour: Cold white, Warm white, red, blue, green, yellow, amber, dark UV, agro light and other colours on demand.

Dimming options (entire installation). ON/OFF option is possible with the addition of a small control board.

Combination with other types of modules and luminaries is possible when sharing a single 24Vdc power supply. In this case the mini LEDs doesn;t need their own power supply. Series using 18Vdc, 12Vdc and 6Vdc when the series is using its own power supply. (voltage depends on the number of dots in a single series.)

Outdoor use is possible with additional rain protection.

The first three pictures show 20mA minileds mounted on a 10*3mm flat aluminium profile.

The next three pictures show 150 mA minileds mounted inside a 15*15*2.5mm U aluminium profile.

The next three pictures show 150 mA minileds mounted on a 15*15*2mm L aluminium profile.

The next three pictures show one 150 mA miniled mounted on a 15*15*2mm L aluminium profile.
The L profile has two holes for screws.

The next four pictures show two 150 mA minileds mounted on customized holder.

The next four pictures show two 150 mA minileds mounted on another customized holder.