LR1 HAGE Led design

Single LED modules are small appliances working only on 24VDC and don't include a 240VAC to 24VDC power supply, The poser supply has to be installed separately in a box or inside another appliance. It's possible to connect several module or more complex appliances together on a single power supply. The only limitation being the maximum current the power supply can give.
These small modules are suitable for indoor spaces with in modern, minimalist interior design. Their visual impact on interior design is minimal, even barely noticeable, despite they relatively high power.

It's typically adjusted between 6W (±720 lm) and maximum 10W (±1200 lm. Normal use is 8W (±960 lm) but the power supply can be regulated to output more or less light and to consume more or less current.
It's made of an aluminium heatsink and a plycarbonate cover held with aluminium profiles on the sides.
These modules can include an option to be turned on or off whith secondary switches.

Indoor use only. This model is not water proof. For outdoor use, a rain protection kit can be ordered on demand.

The pictures below show the basic LED module with the half round satine polycarbonate cover.
In this example the cover is as short as the aluminium heatsink.
It can be longer or shorter according to customer preferences.

The next pictures show the same module with a white matt cover.
The light output is less efficient with white cover, but it's
much more easthetic and less visible on a white background.

The next two pictures show the difference between white and transparent satine covers.

Light effects with the short half circle cover.

the same module with a longer white cover.
Longer covers better conceal the hardware behind it.

The same module off and on

More light effects with the longer half circle cover.